HP PSC 1610v All-in-One Printer User Manual
Page 39
The slots are configured as follows (from top to bottom):
●
SmartMedia, xD-Picture Card (fits in bottom right of the slot)
●
Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied
adapter), Memory Stick Pro
●
CompactFlash (I, II)
●
Secure Digital, MultiMediaCard (MMC)
●
Camera port (to the right of the memory card slots): compatible with any USB-
equipped digital camera that supports PictBridge. Look for the PictBridge icon
(
).
Note
The camera port only supports USB-equipped digital cameras that
support PictBridge. It does not support other types of USB devices. If you
attach a USB device that is not a compatible digital camera to the camera port,
an error message appears on the control panel display. If you have an older
HP camera that does not support PictBridge, try using the USB cable that
came with the camera. Plug it into the USB port on the back of the HP All-in-
One and not into the camera port near the memory card slots.
Tip
By default, Windows XP will format a memory card of 8 MB or less and
64 MB or more with the FAT32 format. Digital cameras and other devices use
the FAT (FAT16 or FAT12) format and cannot operate with a FAT32 formatted
card. Either format your memory card in your camera or select FAT format to
format your memory card in a Windows XP computer.
Chapter 6
36
HP PSC 1600 All-in-One series
Memory
Card
and
PictBridge