HP PSC 1610v All-in-One Printer - Manual (Page 54)

Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo
You can use the Fill Entire Page setting to create a borderless copy of a photo. In
order to achieve a borderless print without changing the proportions of the original, the
HP All-in-One might crop some of the image around the margins. In most cases, this
cropping will not be noticeable.
For the best quality when copying a photo, load photo paper in the paper tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
color and photo print cartridges installed, you have a six-ink system. For more
information, see
Use a photo print cartridge .
To copy a photo from the control panel
1.
Load 10 x 15 cm (4 x 6 inch) photo paper in the paper tray.
Note In order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP All-in-One detects plain paper in
the paper tray, it will not make a borderless copy. Instead, your copy will
have borders.
2. Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3. Press Reduce/Enlarge .
The Reduce/Enlarge menu appears.
4. Press until Fill Entire Page appears, and then press OK .
5. Press Start Copy Color .
The HP All-in-One makes a 10 x 15 cm (4 x 6 inch) borderless copy of your
original photo, as shown below.
Tip If the output is not borderless, then set the paper size to the
appropriate Borderless menu selection, set the paper type to Photo
Paper , set the Photo enhancement, and then try again.
– For more information on how to set the paper size, see Set the copy paper size .
– For information on how to set the paper type, see Set the copy paper type .
– For information on how to set the Photo enhancement, see Enhance light
areas of your copy .
Copy a 10 x 15 cm (4 x 6 inch) photo onto a full-size
page
You can use the Fill Entire Page setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the paper tray. In this example, Fill Entire
User Guide 51
Use
the
copy
features