HP XP Racks - Manual (Page 118)

NOTE: Information in this Confirm window assumes only a single task is executed. If multiple
tasks are executed, the window displays all configuration items. For information on these items,
return to the configuration window by clicking Back and refer to the topic on each configuration
window by clicking Help.
Edit Policies window
Use this window to change settings for mapped external volumes.
See
“Editing external volume policies (settings)” (page 42) for information.
Description Item
LDEVs are automatically created in the internal volume when Yes is selected.
If No is selected, you must create LDEV’s manually. Allow Simultaneous Creation of LDEVs
If Yes is specified in “Allow Simultaneous Creation of LDEVs”, the external
volume’s configuration for the LDEVs is used when Yes is selected. If No is
selected, you must configure LDEV’s manually. Use External Storage System
Configuration
External system’s emulation type. All supported emulation types except
OPEN-L can be specified. See
“Editing external volume policies (settings)”
(page 42) for more information.
Base Emulation Type
Number of LDEVs to be created in the local system when the volume is
mapped. Depends on base emulation type. Number of LDEVs per External Volume
118 External Storage GUI reference