HP ESL E-series Tape Libraries - Manual (Page 106)

11. Close the library doors and add shipping foam to the bottom of the library perimeter (see Figure
65 ).
1. Foam
Figure 65 Adding the shipping foam to the library perimeter
.
Disconnecting library cables
To disconnect library cables:
1. Disconnect the FC cables connecting from the library to the host.
2. If you have LTO4 or LTO5 tape drives, disconnect the FC cables from the tape drives to the SAN.
3. Disconnect the Ethernet cable connecting to the local network.
4. Disconnect the power cord from the library to its power source.
5. Pack the removed cables in with other library accessories.
Relocating the library 106