Preparing the library for operation – HP ESL E-series Tape Libraries User Manual
Page 109
Advertising
7.
Place the top onto the crate.
8.
Secure the crate with two steel restraining bands.
Preparing the library for operation
After shipping or moving the library, see the HP StorageWorks ESL E-Series pre-Installation site survey
instructions, the HP StorageWorks ESL E-Series unpacking and installation guide, and if needed, the
HP StorageWorks ESL E-Series Upgrade to Cross Link poster to:
•
Prepare the new installation site
•
Receive the library
•
Uncrate the library
•
Position the library
•
Install and configure the library
NOTE:
The ESL E-Series library must be unpacked and installed by authorized HP service personnel only.
HP StorageWorks ESL E-Series Tape Library
109
Advertising