HP ESL E-series Tape Libraries - Manual (Page 141)

E Event reporting
The library is capable of reporting a variety of events that occur within the cabinet. An event is defined
as any occurrence of interest to you, the user, that may require your attention and possible intervention.
These events are reported through the OCP and in library support tickets. Find more information on
the events by generating a support ticket with Command View or L&TT. Events classified as informational
might not appear.
Library events are broken up into the following sections:
• Critical events
• Warning events
• Information events
Critical events
Critical events indicate that a failure has occurred in the cabinet. The user must intervene to return the
cabinet to operation.
NOTE:
The “$” in the table below are variables and are filled in at run-time.
Table 23 lists the critical events provided by the library.
Table 23 Critical events
Critical events Event ID
$name sensor in cabinet $framename needs attention, value $value 0x1a0
$name sensor needs attention, status $status 0x1a1
Tape inventory failed 0x1a2
Tape Alert Flag 4 for drive $drive - Media 0x1a3
Tape Alert Flag 5 for drive $drive - Read Failure 0x1a4
Tape Alert Flag 6 for drive $drive - Write Failure 0x1a5
Tape Alert Flag 9 for drive $drive - Write Protect 0x1a6
Tape Alert Flag 13 for drive $drive - Recoverable Snapped Tape 0x1a7
Tape Alert Flag 14 for drive $drive - Unrecoverable Snapped Tape 0x1a8
Tape Alert Flag 16 for drive $drive - Forced Eject 0x1a9
Tape Alert Flag 20 for drive $drive - Clean Now 0x1aa
HP StorageWorks ESL E-Series Tape Library 141