HP ESL E-series Tape Libraries - Manual (Page 57)

Viewing cabinet information
To view library cabinet information:
1. From the Menu screen, use the Up and Down arrows to highlight Cabinet, then press Select to
display the Cabinet screen (see
Figure 38 ):
Figure 38 Cabinet screen
.
The Cabinet screen displays the following information about the library cabinet:
• Cabinet - name of the cabinet
• Model - model number of the cabinet
• Serial Number - serial number of the cabinet
• IEEE ID - internal network identification of the cabinet that includes the date of manufacture,
product type, and serial number
• Slots - number of slots configured in the cabinet
• Drives - number of drives configured in the cabinet
• Load Ports - number of load port slots configured in the cabinet
2. When you are finished viewing cabinet information, press Back to return to the Menu screen.
Viewing library health status information (standalone libraries only)
The Health Status screen captures current information about any errors present at the time Health
Status is selected. Information about sensors with state of Down, Warning, or Critical appears, along
with information on any drives with Load Error, Not communicating, Cleaning requested, or Cleaning
required.
NOTE:
Library status continually appears on the left side of the black bar at the top of the OCP. Possible
status messages are: Online, OK; Online, Warning; and Online, Critical. When multiple errors exist,
the most serious status is reported. The Health Status screen is useful when the status bar shows
warning or critical status.
To view the health status of the library:
1. From the Menu screen, use the Up and Down arrows to highlight Health Status then press Select.
HP StorageWorks ESL E-Series Tape Library 57