HP ESL E-series Tape Libraries - Manual (Page 32)

NOTE:
The number of tape cartridge slots depends on the drive technology used and, on a mixed-media
system, on the ratio of Ultrium and SDLT panels used and their locations. The number of back panel
slots depends on how many drive clusters are in the library. See
SDLT library , and Mixed media
library for tape cartridge quantity information.
To slide the slot panels out of the cabinet, press the slot panel latches down and pull the slot panel
out of the cabinet (see
Figure 21 ).
1. Upper load port panel latch
2. Middle load port panel latch
3. Lower load port panel latch
Figure 21 Sliding the slot panels out of the cabinet
.
Figure 22 shows the left panel bins. Begin with panel 1 and load top to bottom and left to right.
Continue with panel 2 in the same manner, and finally, panel 3.
Library overview 32