HP Designjet Z3100 Photo Printer series User Manual
Page 103
Advertising
6.
Push down as indicated by the arrow shown below.
CAUTION
When installing the new printhead there may be some resistance, so you need
to press it down firmly but smoothly. You should hear a beep and see confirmation on the
front-panel display that the printhead has been inserted. If you have difficulty, see
insert a printhead on page 144
7.
Insert any other printheads, that need to be installed, with the same procedure, then close the
carriage lid.
8.
Ensure the end of the blue handle catches the wire loop on the near side of the carriage.
ENWW
Insert a printhead
93
Hand
lin
g
ink cartrid
ges
and
p
rin
th
eads
Advertising