HP Designjet Z3100 Photo Printer series User Manual
Page 38
Advertising
4.
With both hands, push the spindle into both roll holders at the same time. The spindle snaps in
place.
5.
If the edge of the roll is torn (sometimes due to tape used to hold end of the roll) or not straight,
pull paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
CAUTION
Cut the paper as straight as possible, as uneven paper does not load correctly.
6.
Insert the edge of the paper into the feeder.
WARNING!
Do not push your fingers inside the printer's paper path, the results may be
painful.
7.
Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feed it
automatically into the printer.
28
Chapter 4 Paper handling
ENWW
P
ape
r ha
ndl
ing
Advertising