HP Designjet Z3100 Photo Printer series - Manual (Page 32)

● Default IP: specify the IP address to use when the print server is unable to obtain an IP address
from the network when powered on or when reconfigured to use BOOTP or DHCP
● Send DHCP requests: specify whether DHCP requests are transmitted when a legacy default IP
address or a default Auto IP is assigned
To configure the same network settings from the front panel, press the Menu key to go to the main menu
and select the Connectivity menu icon , then Fast Ethernet > Modify configuration.
Change the graphic language setting
To be able to change the graphic language setting you must install the HP-GL/2 upgrade.
WARNING! You should not need to change the default graphic language setting
(Automatic), and you are not recommended to do so.
Change the graphic language setting from the HP Easy Printer Care and HP Printer Utility applications
with the following steps.
1. Under Windows, select the Settings tab then Printer settings > Printing preferences.
Under Mac OS, select Configuration then Printer settings > Configure printer settings >
Printing preferences.
2. Select one of the following options.
● Select Automatic to let the printer determine which type of file it is receiving. This setting
works for most software applications.
● Select HP-GL/2 only if you are sending a file of the appropriate type directly to the printer,
without going through a printer driver.
You can change the graphic language setting from the front panel. Press the Menu key to return to the
main menu the select the Setup menu icon , then Select graphics language. Select the desired
option and press the OK key to set the value.
NOTE The setting selected through the HP Easy Printer Care (Windows) or HP Printer Utility
(Mac OS) overrides the setting select by the front pane.
22 Chapter 3 Personalizing the printer ENWW
Personalizing the printer