Return to default calibration – HP Designjet Z3100 Photo Printer series User Manual
Page 133
Advertising
5.
Press the
OK
key on the front panel, to save the value.
6.
Wait until the front panel displays the status screen and re-print your print.
Return to default calibration
Returning to the default calibration sets all the corrections made by the paper advance calibration to
zero. To return to the default paper advance calibration value, you must reset the calibration.
1.
Press the
Menu
key to return to the main menu and select the Image Quality Maintenance menu
icon
, then Advance > Reset paper advance
2.
Wait until the front panel displays the operation has completed successfully before pressing the
Back
key to return to the main menu.
ENWW
Recalibrate the paper advance 123
Troubleshooting paper
issues
Advertising