HP Designjet Z3100 Photo Printer series - Manual (Page 60)

NOTE If you wish to print with no margins, you must ensure that your image will fill the page.
If your image is smaller than the page, it will not be automatically stretched.
You can request printing with no margins in the following ways:
● In the Windows driver dialog: select the Paper/Quality tab and press the Layout button. Then
select Borderless.
● In the Mac OS Page Setup dialog: select a paper size name that includes the words “no margins”.
Then, in the Print dialog, select Paper Type/Quality > Layout > Borderless.
When you select Borderless, you must also select one of the following Image Enlargement options:
● Automatically by Printer means that the printer automatically enlarges your image slightly
(normally by a few millimeters in each direction) in order to print over the edges of the paper.
● Manually in Application means that you must enlarge the image yourself in your application, and
select a custom paper size that is slightly larger than the actual paper size.
NOTE If the first print job after loading paper is a borderless job, the printer may trim the leading
edge of the paper before printing.
At the end of a borderless print, the printer normally cuts the print slightly inside the image area
to ensure that the print is borderless. It then cuts the paper again so that no residual part of the
image is included in the next print. However, if the job is cancelled, or if there is white space at
the bottom of the image, only a single cut is made.
Reprint an old job
You can reprint an already-printed job from the front panel, if you have the HP-GL/2 Upgrade and it is
an HP-GL/2 job.
Select the Job Queue menu icon , then select the job from the queue, then select Reprint.
NOTE If you do not have the HP-GL/2 Upgrade, you will not see the Job Queue menu icon
.
To reprint old jobs that are not HP-GL/2, you may be able to use your operating system's printer spooler,
if you have already told the spooler to save old jobs. This facility depends on your operating system.
50 Chapter 5 Printing ENWW
Prin
tin
g