HP Designjet Z3100 Photo Printer series User Manual
Page 104
9.
Lower the handle to rest on the carriage lid.
When all the printheads have been inserted correctly and are accepted by the printer, the printer
beeps.
NOTE
If the printer does not beep when you insert the printhead and the Replace
message appears on the front-panel display, the printhead may need to be reinserted.
10.
Close the window.
11.
The front-panel display confirms that all printheads are correctly inserted. The printer starts
checking and preparing the printheads. The default routine process, when all printheads are
changed, takes 35 minutes. If the printer finds problems in preparing the printheads, it takes longer,
up to 80 minutes. For a single printhead insertion, the times vary between 25 and 45 minutes. After
all printheads are checked and prepared, the printhead realignment procedure runs automatically
if paper is loaded, see
Align the printheads on page 148
94
Chapter 8 Handling ink cartridges and printheads
ENWW
Handling ink cartridges
and p
rin
th
eads