Unpacking, Identifying the shipping carton contents – HP Secure Key Manager User Manual
Page 25
Unpacking
Place the shipping carton as close to the installation site as possible. Before unpacking the SKM, inspect
the shipping carton for damage that may have occurred during shipment. If you detect any damage,
notify the carrier and HP before unpacking the unit.
To unpack the SKM:
1.
Open the top of the shipping cartons.
2.
Carefully lift the units out of the boxes and remove the packing materials.
3.
Place the units on a stable work surface.
NOTE:
Inspect the units for any damage that may have occurred during shipment. If damage is
detected, contact your authorized service representative.
4.
Remove the accessory kits and documentation from the shipping cartons. Set them aside for later use.
5.
Place shipping materials back into the shipping cartons.
6.
Set the shipping cartons aside for later use.
Identifying the shipping carton contents
A new SKM cluster contains at least two appliances, individually boxed.
NOTE:
If the
Important System ROM updates for new processors
, or the
HP ProLiant Essentials Foundation Pack
are included in the carton, please disregard them.
Each appliance box contains the items shown in
Secure Key Manager
25