HP Secure Key Manager User Manual
Page 281
Syntax
hostname# show ip authorization
KMS Server:
Only Allow IPs Specified
Web Administration:
Only Allow IPs Specified
SSH Administration:
Only Allow IPs Specified
Related
command(s)
• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• no ip authorization allowed
• show ip authorization allowed
show ip authorization allowed – display the IP authorization settings for all authorized IP addresses.
Syntax
hostname# show ip authorization allowed
1.
IP Address, Range, or Subnet:
1.1.1.2
KMS Server:
yes
Web Administration:
no
SSH Administration:
no
2.
IP Address, Range, or Subnet:
192.168.1.129
KMS Server:
yes
Web Administration:
yes
SSH Administration:
yes
NOTE:
You can view the settings for a particular IP address by passing in the index number
of the IP address as a parameter in the show ip authorization allowed command.
You might find it helpful to use the show ip authorization allowed command to find
the appropriate index number.
Related
command(s)
• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• no ip authorization allowed
• show ip authorization
show static route – view the static route settings on the SKM.
Syntax
hostname# show static route
Related
command(s)
• static route
• no static route
static route – configure a static route on the SKM.
Syntax
hostname (config)# static route
Enter the destination IP address:
10.0.0.0
Enter the subnet mask:
255.0.0.0
Enter the gateway:
192.168.200.2
Available interfaces:
1.
Ethernet #1
2.
Ethernet #2
Enter the interface (1-2):
Static route successfully added.
Related
command(s)
• show static route
• no static route
Secure Key Manager
281