Snmp commands – HP Secure Key Manager User Manual
Page 284
Related
command(s)
• no webadmin run
webadmin startup – enable web administration when starting up the SKM.
Syntax
hostname (config)# webadmin startup
Related
command(s)
• no webadmin startup
SNMP commands
community – add a community.
Syntax
hostname (config)# community
Enter the community name:
Enter the community source IP/subnet mask pair(s):
Will this community be allowed Enterprise MIB access (y/n):
Will this community be allowed Standard MIB access (y/n):
Successfully added community.
Related
command(s)
• show community
• no community
• edit community
edit community – edit a community.
Syntax
hostname (config)# edit community <community name>
Enter your changes to the community public below.
Press enter to keep the current value for a community property.
Community Name [public]:
Community Source IP [192.168.1.40/255.255.255.0]:
Enterprise MIB Access [y]:
Standard MIB Access [y]:
Successfully modified community.
Related
command(s)
• community
• no community
• show community
edit snmp username – edit an existing SNMPv3 username.
284
Using the Command Line Interface