Administrator procedures, Creating an administrator, Deleting an administrator – HP Secure Key Manager User Manual
Page 64: Ldap administrator server procedures, Setting up the ldap administrator server, Testing the ldap administrator server connection, Setting up the ldap schema, Setting up the ldap failover server, Testing the ldap failover server connection, Password management procedures
Administrator procedures
Creating an administrator
To create an administrator account:
1.
Log in the Management Console as an administrator with Administrators access control.
2.
Navigate to the Create Administrator section on the Administrator Configuration page (Device
> Administrators > Administrators).
3.
Enter values in the Username, Full Name, Description, and Password fields.
4.
Confirm the password in the Confirm Password field.
5.
Select the access controls for the administrator account.
6.
Click Create.
Deleting an administrator
To delete an administrator account:
1.
Log in the Management Console as an administrator with Administrators access control.
2.
Navigate to the Administrator List section on the Administrator Configuration page (Device >
Administrators > Administrators).
3.
Select the administrator and click Delete.
4.
Confirm the action on the Secondary Approval section.
LDAP Administrator server procedures
This section describes the procedures you will follow when managing LDAP administrator servers.
Setting up the LDAP administrator server
To set up the LDAP Administrator Server:
1.
Log in to the SKM appliance as a Local administrator with High Access Administrator access control.
2.
Navigate to the LDAP Administrator Server Properties section of the Administrator Configuration
page (Device > Administrators > LDAP Administrator Server).
3.
Click Edit.
4.
Enter the Hostname or IP Address and Port.
5.
If using SSL, select Use SSL and enter the Trusted Certificate Authority.
6.
Enter the number of seconds to wait for the LDAP server during connections in the Timeout field.
7.
Enter the Bind DN (distinguished name) and Bind Password.
8.
Click Save.
Testing the LDAP administrator server connection
To test the LDAP administrator server connection:
1.
Log in to the SKM appliance as a Local administrator with High Access Administrator access control.
2.
Navigate to the LDAP Administrator Server Properties section of the Administrator Configuration
page (Device > Administrators > LDAP Administrator Server).
64
Performing configuration and operation tasks