HP Secure Key Manager - Manual (Page 278)

Related
command(s)
• ip authorization
• ip authorization allowed
• no ip authorization allowed
• show ip authorization
• show ip authorization allowed
ethernet port – change the Network Interface Port Speed/Duplex settings.
Syntax
hostname (config)# ethernet port
fletch (config)# ethernet port
Enter the port speed and duplex for Ethernet #1:
1:
Auto-Negotiate
2: 10 Mbps/Half Duplex
3: 10 Mbps/Full Duplex
4: 100 Mbps/Half Duplex
5: 100 Mbps/Full Duplex
Related
command(s)
• show ethernet port
gateway – define the default gateway to be used by the SKM.
Syntax
hostname (config)# gateway <gateway IP> <interface #>
For example, you might enter the following:
hostname (config)# gateway 192.10.10.10 1
Related
command(s)
• show gateway
• no gateway
ip address – add an IP address, subnet mask, and interface number to the network settings of the SKM.
Syntax
hostname (config)# ip address [<ip address> <submask> <interface #>]
ip address
Enter the IP address:
Enter the subnet mask:
Available interfaces:
1.
Ethernet #1
2. Ethernet #2
3. Virtual Interface
4. Ethernet #1 Tag 100
5. Ethernet #1 Tag 200
Enter the interface (1-5):
Related
command(s)
• no ip address
• show interface ethernet
• show interfaces
ip authorization – edit the IP authorization settings.
278 Using the Command Line Interface