HP PCIe IO Accelerators for ProLiant Servers - Manual (Page 100)

Utilities 100
fio-trim-config
Description
Enables or disables the Trim feature (Windows® service), which reclaims available space from the file
system. It is generally recommended that Trim be enabled for best performance. Running this utility with
no options displays the current Trim status. See "Trim support (" Trim support (Windows only) " on page
105 )" for more information.
NOTE: This utility affects all IO Accelerators in the system. You cannot enable or disable Trim
for only selected devices.
Syntax
fio-trim-config <iodrive-device> [-d, -e, -v, -h]
Options
• -d Disable Trim on this computer.
• -e Enable Trim on this computer.
fio-update-iodrive
Description
Updates the PCIe IO Accelerator firmware. This utility scans the PCIe bus for all PCIe IO Accelerators and
updates them. A progress bar and percentage are shown for each device as the update completes. To
update one or more specific devices, use the -d option with the device number (shown in fio-status)
if the driver is loaded, or the -s option along with the PCIe bus address (viewed using lspci) if the
driver is unloaded, to identify the devices.
CAUTION: The default action (without using the –d or –s option) is to upgrade all PCIe IO
Accelerator devices with the firmware contained in the <iodrive version.fff> file.
Confirm that all devices need the upgrade prior to running the update. If in doubt, use the –p
(Pretend) option to view the possible results of the update.
Syntax
fio-update-iodrive <iodrive_version.fff> [-d, -l, -p, -q, -s, h, -v]
where <iodrive_version.fff> is the path and firmware archive file provided. The default path is
/usr/share/fusionio/images.
Options
CAUTION: Use the –d or –s options with care since updating the wrong PCIe IO Accelerator
could damage your device.
• -d: Updates the specified devices (by fctx where x is the number of the device shown in fio-
status).
• -l: Lists firmware available in the archive.
• -p: Pretend shows what updates would be done. However, the actual firmware is not modified.
• -q: Runs the update process without displaying the progress bar or percentage.