HP PCIe IO Accelerators for ProLiant Servers - Manual (Page 9)

Introduction 9
IO Accelerator Duo
capacity
320GB 640GB
512B
packet size) packet size)
Access latency 26 μs (read) 29 μs (read)
*Performance achieved using multiprocessor enterprise server
• Enterprise data integrity
• Field upgradeability
• Green footprint, 7.5 watts nominal per device
NOTE: MSI was disabled to obtain these statistics.
Packing list
• PCIe IO Accelerator Solid State Storage Device
• HP PCIe IO Accelerator for ProLiant Servers installation instructions
• PCIe IO Accelerator half-height bracket (used on low-profile systems)
Required operating environment
The HP PCIe IO Accelerator is supported for use in the following operating environments:
• Red Hat Enterprise Linux 4 (AMD64/EM64T)
• Red Hat Enterprise Linux 5 (AMD64/EM64T)
• Red Hat Enterprise Linux 6 (AMD64/EM64T)
• SUSE LINUX Enterprise Server 10 (AMD64/EM64T)
• SUSE LINUX Enterprise Server 11 (AMD64/EM64T)
• Windows Server® 2003 (x86_64-bit only) SP2
• Windows Server® 2008 (x86_64-bit only) R1 with SP2 or higher
• Windows Server® 2008 (x86_64-bit only) R2
• VMWare ESX 4.0 Update 1
CAUTION: Version 2.2 of the driver software is not backward-compatible with any previous
driver version. When you install version 2.2, you cannot revert to any previous version.
IMPORTANT: All operating systems must be 64-bit architecture.
NOTE: IO Accelerators cannot be used as hibernation devices.