HP PCIe IO Accelerators for ProLiant Servers - Manual (Page 70)

HP IO Accelerator Management Tool 70
• Page File Settings—Enables or disables the use of the IO Accelerator as a page file device.
NOTE: A low-level format is not the same as an operating system file system format and should
generally be performed only when recommended by HP Customer Support because the device
is shipped pre-formatted.
Detached IO Accelerator after installation
An IO Accelerator might appear detached immediately after installation and the first time you run IO
Accelerator Management Tool.
Check to see if the Device Report panel shows that the device has outdated firmware. If this is the case,
see "Update firmware (on page 79 )" to update the firmware.
Navigating the IO Accelerator Management Tool
You can navigate the IO Accelerator Management Tool using familiar keyboard controls:
• The Tab key moves the focus between on-screen components.
• The Enter key activates a selection.
• The Scroll keys (Up Arrow, Down Arrow, PgUp, PgDn, Ctrl-Home, Ctrl-End, and so on) control the
Device Report panel scrolling.
• The Esc key closes dialog boxes.