Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 42)

Advanced Mode Guidance
Resetting Guidance
Use the icon to create or load a field or line.
To reset guidance:
Select the icon and press . The Finished With Field? screen appears. 1.
Select one of the two options and then press : 2.
Yes − To map a new field (see Creating a New Field or Line ) or select an existing field (see
Selecting a Field ).
♦
No − To map a new AB Line (see Adding an AB Line ) or select an existing AB Line in the
current field (see Selecting an AB Line ).
♦
Note: If you select 'Yes', the field is immediately closed. This means that you cannot cancel out of the New
Field wizard and go back to your current field.
Creating a New Field or Line
To create a new field, the New Field wizards takes you through the following steps:
Select the pattern type. 1.
Set up the implement. 2.
Set up any additional pattern requirements (if necessary). 3.
38