Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 9)

How the Buttons Work
On the front of the lightbar, there are six buttons. The buttons on the left and right sides of the lightbar work in
different ways.
Action buttons (on the right of the screen)
On the main guidance screen:
Press or to scroll through the action icons.
•
Press to select the highlighted icon.
•
The following icons may appear to the right of the guidance screen:
ICON DESCRIPTION ICON DESCRIPTION
Reset guidance Nudge left
Set Point A Nudge right
Set Point B Pause guidance
Start headland Resume guidance
Complete headland Change zoom scale
Pause swath recording
Go to main
Configuration menu
Resume swath recording Change view mode
Currently recording FreeForm curve (press to stop)
Next FreeForm
segment
Not currently recording FreeForm curve (press to start) Shift AB Line
Display point, line and area mapping icons
Display panning
icons
Note: Action icons appear only when they are appropriate. They are not all visible at all times.
The following action icons may appear on the right of a configuration screen:
ICON DESCRIPTION ICON DESCRIPTION
Increase value / up to next option Proceed to next screen
Decrease value / down to next option Accept settings
5