Ag Leader Intellislope CAN/GPS Simulator Operation Guide - Manual

PN: 2006008 Rev. A June 2014 Page 1 of 7
CAN/GPS Simulator Operation Guide
Once the software and drivers are installed on the computer and the CAN/GPS simulator
connections are made, this guide will outline how to use the CAN/GPS simulator for various
operations.
DirectCommand Liquid
1. Follow the DirectCommand Quick Reference sheets to setup the display: Knowledgebase
> Product Manuals > Displays > Ag Leader® Integra/Versa Quick Reference Guides
2. Import field boundaries into the display by navigating to: Setup > Grower/Field
Management > Add a new field and then press the import button to bring in a boundary.
3. Open the CAN simulator program:
a. On the Application tab, click on Liquid Application Control. This will open the Auxiliary
Input Module and the Liquid Module required to load the run screen for a DirectCommand
liquid configuration.