Ag Leader Intellislope CAN/GPS Simulator Operation Guide - Manual (Page 4)

PN: 2006008 Rev. A June 2014 Page 4 of 7
Harvest Operation
1. Follow the Harvest Quick Reference sheet to setup the display: Knowledgebase > Product
Manuals > Displays > Ag Leader® Integra/Versa Quick Reference Guides
2. Import field boundaries into the display by navigating to: Setup > Grower/Field
Management > Add a new field and then press the import button to bring in a boundary.
3. Open the CAN simulator program:
a. On the grain harvest tab, select Grain Yield Monitoring
b. Selecting grain yield monitoring will open all 3 harvest modules at once. On the speed
module, set the elevator speed in the range of 250-650 RPMs for the simulator to log. Also,
assign a value for grain flow on the grain sensor module.