Ag Leader ParaDyme Setup and Advanced Tuning Guide - Manual (Page 14)

2202 South Riverside Drive, Ames, IA 50010
Phone: 515‐232‐5363 Internet: http://www.agleader.com
25‐Jun‐10 ‐ Rev E
14
Screen 2 of 9 – HEADING TUNING
What do the Steer Left, Steer Right, Center Wheels and Stop buttons do in the Heading Tuning
Screen?
1) Steer Left – Turns the heading of the vehicle 5 degrees left of its’ current heading. Figure 8
shows an example of the paths that a vehicle will drive when Steer Left is pressed.
2) Steer Right – Turns the heading of the vehicle 5 degrees right of its’ current heading. Figure 8
show an example of the that a vehicle will drive when Steer Right is pressed.
3) Center Wheels – Steers the vehicle back to the heading that was set when the “Set AB Heading”
button was pressed.
4) Stop – Disengages the ParaDyme System, it can also be disengaged by turning the steering
wheel.
Figure 8 ­ Heading Tuning Engage Patterns
What does the Heading Slider adjust and when to adjust it?
In the Heading Tuning screen, Heading slider adjustment changes two things, they are:
1) The volume Heading talks to Steering.
2) The tolerance Heading tries to keep the tractor’s heading.