Innovate Motorsports SSI-4 - Manual (Page 12)

- 12 -
8.1 Changing the device name
If multiple SSI-4’s are used in a Log-Chain, each MUST be given a unique name so that
LogWorks can identify each SSI-4. Just enter a name in the edit box in this page.
8.2 Updating the firmware
Click on the ‘Update Firmware’ button. You will be presented with a file dialog box that allows you
to select a firmware file. Firmware files end with the file extension .dld.
SSI-4 firmware file names start with: SSI4. The first part is followed by a dash, then a V, then the
version number without dots.
Example: SSI-4 firmware version 1.00 alpha release would have the file name SSI4-V100A.dld
SSI4 firmware version 1.00 would have the file name SSI4-V100.dld
After you opened the firmware file, this new firmware will be downloaded in the SSI-4 device.
8.3 Input Configurations
Click on the appropriate Input tab in the top of the window to configure one of the SSI-4 inputs..
Each Input has different capabilities. Below are details for the setup of each capability.
8.3.1 Measuring RPM (Input 1 only)
The drop-down list at the top of the window allows you to select the different functionality for that
input. If RPM is selected, the area below the functionality selection shows as above.