Command ‘b’ – get last mts packet passed, Command ‘s’ – exit expert mode, Command 0xff – don’t hang up on me – Innovate Motorsports OT-2 SDK User Manual

Page 44

Advertising
background image

44

Command ‘b’ – Get Last MTS Packet passed

Sent:

1 bytes
{

U8 Cmd;

// ‘b’

}


Responds:

Variable (2 bytes minimum)
{

U8 Len;

// Length of data to follow

U8 Sequence;

// Sequence Counter, incremented

// each time an MTS packet is

// passed

// Optional

{

U8 Packet[Len-1]; // MTS Packet (if any)

}

}

Notes:

If there is no MTS hardware attacked, you will

get ‘0x01 0x00’ (1 byte, sequence 0). Otherwise, you will
get a changing sequence, followed by a raw MTS packet.

Command ‘s’ – Exit Expert Mode

Sent:

1 byte
{

U8 Cmd;

// ‘s’

}


Responds:

None


Notes:

This command returns you to Setup Mode.

Command 0xFF – Don’t hang up on me!

Sent:

1 bytes
{

U8 Cmd;

// 0xFF

}


Responds:

1 byte

{

U8 Result;

// should be 0xFF

}


Notes:

This command merely gives you a way to thwart the Expert
Mode watchdog timer. In general, you should avoid even
needing it. But, here it is, just in case…

Advertising