2940 air adjust system information – Yetter 2940 Short Floating Air Adjust Residue Manager User Manual
Page 12
Advertising
12
2940 AIR ADJUST SYSTEM INFORMATION
RESIDUE MANAGER__________________________________________________________
WIRE, LINES, AND FITTINGS KIT_____________________________________________
12V-DC cables will be used to power the air
compressor, cab control, and dump valves.
Flexible tubing will be used to move air
from the tank to each air bag. Each kit will
include pneumatic lines for both circuits,
down and lift, as well as the fittings to make
connections and cable ties to securely fasten
the lines to the planter.
Note: All 2940 Air Adjust kits
include a tubing cutter within the kit.
The 2940-341 cutter should be used for
every cut to ensure a clean, square cut.
Advertising