Yetter 2940 Short Floating Air Adjust Residue Manager - Manual (Page 17)

17
INSTALLING 2940 COMPRESSOR ASSEMBLY
2940 AIR COMPRESSOR MOUNTING GUIDE
2940-085 mounting kit is designed for
mounting to the 2 point cross hitch on the
planter, or require greater elevation of the
compressor for clearance reasons.
The most common mounting location for
larger planters will be on the draft bar. Use
the 2940-086 mounting kit for situations that
require mounting elsewhere on the planter
than the hitch. This will allow the compressor
to be elevated and set back (or forward) to
avoid clearance issue.
REFER TO PAGE 77 & 78 FOR PART LIST