Yetter 2940 Short Floating Air Adjust Residue Manager - Manual (Page 64)

64
MAINTENANCE/ASSEMBLY
Storing the Equipment
Store the machine in an area away from human activity
Store the machine in RAISED position.
Install service locks on all wheel cylinders.
At the end of the season, the machine should be thoroughly inspected and prepared for
storage. Repair or replace any worn or damaged components to prevent down time at
the start of the next season. Store the machine under cover with all parts in operating
condition.
• Clean machine thoroughly to remove all dirt, debris, and crop residue, which would
hold moisture and cause rusting.
• Inspect machine for worn or broken parts. See your Yetter Farm Equipment dealer
during the off-season so that parts or service can be acquired when machine is not
needed in the field.
• Lubricate bearings as outlined in the Lubrication section.
• Paint all parts which are chipped or worn and require repainting.
• Store machine in a clean, dry place with the planting unit out of the sun.
• If the machine cannot be stored inside, cover with a waterproof tarpaulin and tie
securely in place.
• Do not allow children to play on or around the machine.