GReddy TURBO KITS: VW Golf 1.8T 2002-05 / TD04-19T - Manual (Page 10)

(4) Install four M8x38mm stud bolts to the outlet
of the exhaust housing.
〈Part № 52〉
(5) Connect the provided vacuum hose to the
actuator using the provided hose band.
〈Parts № 23, 28〉
3 - 4 Turbo Charger Installation
(1) Install the turbo charger to the stock manifold.
Use OE exhaust gasket.
※ Use OE bolts and flat washers. Use provided
spring washers to install turbo.
※ Please replace manifold gasket when installing.
〈Part № 53〉
(2) Use the provided banjo union fitting, stock banjo
bolt, and stock aluminum washer gaskets to
install the turbine oil pressure feed hose to the
engine block oil feed point.
ＫＩＴ Banjo Union
※ Please replace aluminum washers.
〈Part № 12〉
9