GReddy TURBO KITS: VW Golf 1.8T 2002-05 / TD04-19T User Manual
Page 11
※ Route the oil pressure hose behind the heater
hose and use cable ties to secure the hose.
(3) Use the stock oil return pipe to install between
the oil return on the turbine and oil pan.
※ Use the provided M6x20mm bolts for the
turbine side and stock bolts for the oil pan
side of the return pipe. Use stock gaskets.
※ Please replace the stock gaskets.
〈Parts № 41, 48〉
3 - 5 Down Pipe Installation
(1) Place the down pipe on the exhaust housing
outlet flange.
〈Parts № 3, 52〉
Cut area
(2) Cut the front pipe where it it welded to the
catalytic converter. (Turbine side of cat.)
※ Be sure that catalytic converter is free from
debris or metal shavings before welding.
Please use goggles to prevent and
injury while fabricating.
10