GReddy TURBO KITS: VW Golf 1.8T 2002-05 / TD04-19T User Manual
Page 15
(2) Disconnect the fuel hoses from the fuel pipes.
※ It is possible that these hoses may be
pressurized. When removing, cover hose with
a towel to guard from fuel spraying.
Take caution when disconnecting lines.
Wear necessary protective equipment.
(3) Disconnect the fuel pressure regulator vacuum
hose, remove the fuel rail bolts and remove the
fuel rail with the injectors.
Pressure Regulator Vacuum Hose
(4) Remove the retaining clip and fuel injector
from the fuel rail.
※ Make sure the fuel rail is emptied before
removing injectors.
(5) Apply rubber or silicone grease to the injector
inlet o ring. Make sure the injector is
properly inserted into the fuel rail before
installing the retaining clip.
〈Parts № 37〉
(6) Install fuel rail with the provided spacer in
between the fuel rail mount and intake
manifold. Use the factory bolts to install fuel
rail.
〈Parts № 38〉
14