Outback Power Systems GS3548E Operators Manual - Manual (Page 51)

900-0145-01-01 Rev A 49
Metering
MATE3 Screens
The MATE3 system display can monitor the GS inverter and other networked OutBack devices.
From the MATE3 Home screen, the Inverter “soft” key accesses the screens for monitoring the inverter.
(See the MATE3 owner’s manual for more information.)
Figure 14 Home Screen
Inverter Screens
The Inverter soft key opens a series of screens showing the inverter operating mode, battery voltage,
and status of several AC operations. The
<Port> soft key will select other networked OutBack
inverters, if present.
Figure 15 Inverter Screens
Screen items:
 The upper left corner is the Inverter Mode (see above). When Charging is indicated, the Charge Mode
specifies the stage.
 Invert displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactive system it may be sold back to the utility grid.
Inverter Soft Key
Inverter Mode Charge Mode
Inverter Modes:

Inverting (see page 22)
 Searching (see page 23)
 Support (see page 14)
 Sell (see page 15)
 Charging (see Bulk on page 29)
 Charger Off (see pages 26 and 30)
 Float (see page 30)
 EQ (see page 30)
 Silent (see page 30)
 PassThru (see page 26)
 Error (see page 57)
 Off
Charge Modes (see page 27:

BULK
 FLOAT
 EQ