Serial commands, Reg re-gaining settings, Cr re-gaining parameters – Vaisala HMP230 User Manual
Page 156: Serial, Commands, Re-gaining settings, Re-gaining parameters
Advertising
HMP230 SERIES
Appendix 9: Re-gaining
M210225en-B
150
5.
SERIAL COMMANDS
REG
Re-gaining settings
REG <cr>
REG nnn <cr>
nnn = ON or OFF
Command REG is used to check the re-gaining parameter settings and to
activate or inactivate the automatic re-gaining.
Examples: checking the current settings
>reg
REG OFF
automatic re-gaining is inactive
Interval
min :
720
Duration
s :
120
Temp diff
:
0.50
Settl time
s :
240
k
% :
95.00
>
activating the automatic re-gaining
>reg on
REG ON
>
deactivating the automatic re-gaining
>reg off
REG OFF
>
CR
Re-gaining parameters
CR <cr>
Command CR can be used to check the values of re-gaining parameters.
Example:
>cr
Interval
min :
720
Duration
s :
120
Temp diff
:
0.50
Settl time
s :
240
k
% :
95.00
>
Advertising