ARI Armaturen CONA control EN - Manual (Page 17)

Rev. 0040807014 1614 Page 2-17
Operating and Installation Instructions
CONA
®
-control
5.5 Measuring amplifier
5.5.1 Notes on installation
5.5.2 Installation procedure
The measuring amplifier can either be mounted directly on a wall or fastened to the pipe or
steam trap with a pipe clamp. If it is mounted on the pipe, it should preferably be fastened
on the condensate side in order to avoid high temperatures close to the electronics.
Fig. 11
5.5.3 Drilling pattern for wall mounting
Fig. 12
ATTENTION !
- The mains voltage must coincide with the values indicated on the rating plate.
- Never touch live parts while carrying out adjustments!
- Exercise particular caution when working with voltages higher than 24 V!
- Never insert or withdraw modular isolating terminals that are still live!
Steam trap
Max. cable length 2 m
Measuring
amplifier