ARI Armaturen CONA control EN - Manual (Page 9)

Rev. 0040807014 1614 Page 2-9
Operating and Installation Instructions
CONA
®
-control
4.5 Central status indication
Fig. 6
No. Designation
1 Reset button for resetting stored
fault indications
< 2 s: Resets the corresponding
steam trap
> 2 s: Resets all steam traps
2 Power LED per indication card
3 Fault indications for the
corresponding steam trap
(refer to "4.3 Indications on the
CONA®-control system")
4 Indication card
Indicates the operating states of up
to 30 steam traps
5 AS-i / PROFIBUS gateway
6 Power supply