Videoswitch Vi-K3 - Manual (Page 30)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
28
8.6.2 Wipe
Press the
WIPE key to turn on the wiper. Press again to turn off.
8.6.3 Auto-Pan
Press the
AUTO-PAN key to turn on the auto-pan function. Press again to turn off.
8.6.4 Lamp
Press the
LAMP key to turn on the lamp. Press again to turn off.
8.6.5 Relay
Holding the
ALT key on, press the RELAY key to turn on the auxiliary relay. Press these keys again to turn
relay off again.
8.6.6 Camera
Press and hold the
ALT key and press the CAMERA key to turn on the camera relay. Press these keys
again to turn it off again.
8.7 Presets
8.7.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
8.7.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
8.8 Tours
This dome only supports programmable 1 tour/sequence. Tour 1 is a tour through all programmed presets
with a default dwell & speed, tour 2 uses individual dwell and speed for each preset.