4 relay, 7 presets, 1 recalling a preset – Videoswitch Vi-K3 User Manual
Page 35: 2 setting a preset, 8 tours, 1 running a tour, 2 programming a tour, Presets, Tours, Vi-k2/vi-k3 universal keyboard
Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
33
9.6.4 Relay
Holding the
ALT key on, press the RELAY key to turn on the auxiliary relay. Press these keys again to turn
relay off again.
9.7 Presets
9.7.1
Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
9.7.2
Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
• The dome menus may automatically appear so that a text string can be entered.
9.8 Tours
9.8.1
Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2, 3…16 to run a tour (sequence) that has previously been
stored.
• The dome will run the tour until the TOUR key is pressed again.
9.8.2
Programming a Tour
To start the tour programming: