1 start here, 1 connecting up, 2 connect to a monitor – Videoswitch Vi-K3 User Manual
Page 8: 3 multiple vi-k2/vi-k3 keyboards, Start here, Connecting up, Vi-k2/vi-k3 universal keyboard
Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
6
1 Start Here
The Vi-K2/Vi-K3 is designed to provide integrated control of Videoswitch Digital Recorders and third party
domes and/or pan and tilt heads.
The Vi-K2/Vi-K3 controls all Videoswitch Vi-series digital recorders. For controlling VDM and VDC series
products, the VK-2 should be used.
PLAYBACK CONTROL
TOUR
FOCUS
ZOOM
IRIS
PRESET
AUTO-PAN
LAMP
WASH
STATUS
WIPE
CAMERA
LIVE
BACK
OK
DEF
DISPLAY
UNIT
DOME
FN
PSW
INFO
MENU
BURN
FIND
1
2
3
4
5
6
7
8
Н
Н
Н
Н
9
0 / 10
11
12
13
14
15
16
ALT
RS232
MONITOR
12V DC
OUT
IN
DOME S-1
DO MES-2
AUTO
PROG
CONFIG
STORE
AUTO
CAMERA
RELAY
F1
F9
HOME
F2
F10
F3
F11
F4
F12
F5
F13
F6
F14
F7
F15
F8
F16
K2
+
-
1.1 Connecting Up
1.1.1
Control of Digital Recorder (or other Videoswitch unit)
The connector marked “
Out” is connected to the keyboard input of a Videoswitch Digital recorder, using a
CAT5 cable.
1.1.2
Connect to a monitor
Connect a monitor to the BNC connector marked “
MONITOR” on the Vi-K2/Vi-K3. Note that the Digital
Recorder must be equipped with the necessary interface. Early Videoswitch Digital Recorders may lack this
interface, in which case a Videoswitch T25A adaptor PCB and balun are required.
1.1.3
Multiple Vi-K2/Vi-K3 Keyboards
If a second Vi-K2/Vi-K3 keyboard is to be used, connect the “
Out” output RJ45 connector of the second
(slave) keyboard to the “
In” input RJ45 connector of the first (master) keyboard. Further keyboards may be
daisy-chained in the same way. All domes and Digital Recorders are connected to the master keyboard.