Videoswitch Vi-K3 - Manual (Page 91)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
89
22.6.2 Wipe
Press the
WIPE key to turn on the wiper. Press again to turn off.
22.6.3 Auto-Pan
Press the
AUTO-PAN key to turn on the auto-pan function. Press again to turn off.
22.7 Presets
22.7.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
22.7.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
22.8 Tours
22.8.1 Running the Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press the number key 1 to run the tour that has previously been stored.
• The dome will run the tour until the TOUR key is pressed again.
22.8.2 Programming the Tour
To start the tour programming:
• Holding
the
ALT key on, press the PROG key.
• The display will show the letter “t—”, flashing.
• Press one of the number keys 1, 2, 3 or 4 to select a tour block. Each tour has 4 blocks and each
block has 8 preset positions that can be programmed. When running, the tour will process each
block sequentially.
• Holding
the
ALT key on, press the PROG key.