8 menus, 9 other commands, 10 forward vision pelco-d – Videoswitch Vi-K3 User Manual
Page 81: Menus, Other commands, Forward vision pelco-d, Vi-k2/vi-k3 universal keyboard
Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
79
• The display shows flashing “rEC”.
• All joystick movements will be recorded until the programming is finished.
• While the display shows flashing “rEC”, pressing one of the number keys 1, 2, 3…16 will move to
a preset (See “Presets” above).
To finish programming a tour:
• Holding
the
ALT key on, press the PROG key to finish the tour programming.
19.8 Menus
The Vi-K2/Vi-K3 has a special mode to make access to dome menus very easy:
• Press
the
DOME key on the Vi-K2/Vi-K3.
• The letters “Do” will appear on the display.
While the “
Do” is being displayed, some of the keys on the Vi-K2/Vi-K3 have special functions as follows:
• Press
the
MENU key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
OK key to enter a sub-menu or to accept a menu setting.
Please Note for JUNO domes to select menu options please use focus in on joystick rather then ok key.
19.9 Other
Commands
180
° turn
• Press and hold ALT then the F1 key
Alarm acknowledge (Alarms 01 – 08)
• Press and hold ALT while pressing F9 – F16
Auxiliary (01 – 08)
• Aux 1: Press and hold ALT then press the RELAY key to toggle.
• Aux 2: Press the LAMP key to toggle.
• Aux 3: Press the WASH key and hold to set, release to clear.
• Aux 4: Press the WIPE key to toggle.
• Aux 5-8: Press and hold ALT then press the one of the F5 - F8 keys.
19.10 Forward vision Pelco-D
When using A Forward vision PTZ dome camera the default AUX commands are mapped differently to the
default Videoswitch AUX commands. To rectify this you must download and use Forward Visions
PelcoDTungpo7 camset program to map the AUX commands so that our Vi-K2/Vi-K3 keyboard will function
correctly with the Dome Camera.