4 auxiliary functions, 1 lamp, 5 presets – Videoswitch Vi-K3 User Manual
Page 83: 1 recalling a preset, 2 setting a preset, 6 tours, 1 running a tour, 2 press the tour key, 7 menus, Auxiliary functions
Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
81
20.4 Auxiliary
Functions
20.4.1 Lamp
Press the
LAMP key to turn on the lamp. Press again to turn off.
20.5 Presets
20.5.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
20.5.2 Setting a Preset
• Select preset number to be set from Vi-K2/Vi-K3
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the PRESET key.
• Select the required preset number
• Press and hold the ALT key and then press the PRESET key to store the preset.
20.6 Tours
20.6.1 Running a Tour
20.6.2 Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2, 3…16 to run a tour (see table below).
• The dome will run the tour until pan/tilt/preset
20.7 Menus
The Vi-K2/Vi-K3 has a special mode to make access to dome menus very easy:
• Press
the
DOME key on the Vi-K2/Vi-K3.
• The letters “Do” will appear on the display.
While the “
Do” is being displayed, some of the keys on the Vi-K2/Vi-K3 have special functions as follows: