Kenwood KDC-4751SD User Manual
Page 22
22
English
Bluetooth Setup
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select [SETTINGS], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
■
See table below for selection.
■
Repeat step 3 until the desired item is selected/activated.
■
Press
to return to the previous item.
4
Hold
to finish the procedure.
■
To exit Bluetooth mode, press
.
Item
Selectable setting (Preset: *)
PAIRING
DEVICE SEARCH/
DVC SEARCH
Registers a Bluetooth device (pairing).
(For details, see page 20.)
PHONE SELECT/
PHONE SEL
Selects a cell-phone connection.
(For details, see page 20.)
S-DVC SELECT/
S-DVC SEL
(For details, see page 20.)
DEVICE DELETE/
DVC DELETE
Cancel registration of the Bluetooth device.
1. Turn the volume knob to select the Bluetooth device, then press to confirm.
2. Turn the volume knob to select “YES”, then press to confirm.
SMS DOWNLOAD/
SMS DL
Download a short message. (For details, see page 24.)
VOICE TAG
PB NAME EDIT/
PB NAME EDT
Registers voice for voice recognition and voice to select the Phone number category in Phone book.
(For details, see page 21.)
PN TYPE EDIT/
PN TYPE EDT
DETAILED SET/
DETAIL SET
PIN CODE EDIT/
PIN EDIT
Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is
specified.
1. Turn the volume knob to select the number.
■
To move to the next digit, press
¢.
■
To delete the last digit, press
4.
2. Press the volume knob to register a PIN code
AUTO ANSWER
OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;
1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.
RECONNECT/
RECONCT
ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
even after it is disconnected. ; OFF: Cancels.
■
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
selecting [PHONE SELECT]/ [PHONE SELL].
BT HF
FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all
speakers.
CALL BEEP
ON *: You can output a beep from the speaker when a call comes in. ; OFF: Cancels.
B64-4799-10_01_E_English.indd 22
B64-4799-10_01_E_English.indd 22
11/01/06 15:05
11/01/06 15:05