Kenwood KDC-4751SD User Manual
Page 27
English
27
Item
Selectable setting (Preset: *)
HPF REAR
THROUGH *: All signals are sent to the rear speaker. ;
40/60/80/100/ 120/150/180/220 (HZ): Frequencies lower than the specified value are cut off.
LPF
SUBWOOFER/
LPF SUB-W
THROUGH *: All signals are sent to the subwoofer. ;
50/60/80/100/120 (HZ): Frequencies higher than the specified value are cut off.
SUB-W PHASE
REVERSE/ REV (180°)/ NORMAL/ NORM (0°) *: Selects the phase angle of the subwoofer output to be in
line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is
selected for [LPF SUBWOOFER/ LPF SUB-W].)
SUPREME SET
ON *: Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/
WMA audio compression. ; OFF: Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc, a USB
device or a SD, except iPod.)
VOLUME
OFFSET/
VOL OFFSET
–8 — 0 * — +8 (for AUX) ; –8 — 0 * (for other sources): Presets the volume adjustment level of each
source. The volume level will automatically increase or decrease when you change the source. (Before making
an adjustment, select the source you want to adjust.)
■
Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST].
■
[SUB-W LEVEL/ SUB-W SET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PREOUT/ SWITCH
PRE] is set to [SUB-W]. (page 7)
■
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is set to
[ON].
[SETTINGS]
Item
Selectable setting (Preset: *)
AUX NAME SET/
AUX NAME
AUX */ TV/ VIDEO/ GAME/ PORTABLE/ DVD: Selects the desired name for the connected component.
(Selectable only if “AUX” is selected as the source.)
CLOCK
CLOCK ADJUST/
CLOCK ADJ
(For details, see page 6.)
TIME SYNC
ON *: Synchronizes the Radio Data System station time data and the unit’s clock. ; OFF: Cancels.
DISPLAY
DIMMER SET
ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL
AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF *: Cancels.
BT DVC STATUS/
DVC STATUS
You can display the connection status, signal strength, and battery level of cell-phone.
HF-CON: Connection status for cell-phone. ; AD-CON: Connection status for BT Audio. ; BATT: Battery level of
cell-phone. ; SIGNAL: Signal strength of cell-phone.
TUNER SET
NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK: Selectable only if any source other than tuner
source is selected. (For details, see page 8.)
B64-4799-10_01_E_English.indd 27
B64-4799-10_01_E_English.indd 27
11/01/06 15:05
11/01/06 15:05