Kenwood KDC-4751SD - Manual (Page 8)

8
English
Listening to the Radio
1 Press SRC to select “TUNER”.
2 Press BAND repeatedly to select a band (FM1, FM2, FM3, MW/LW).
3 Press 4 / ¢ to search for a station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4 Hold to finish the procedure.
Item Selectable setting (Preset: *)
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF *: Cancels.
SEEK MODE Selects the tuning mode for 4 / ¢ buttons.
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;
MANUAL: Manually search for a station.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is
not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)
MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).
PTY SEARCH Selects the available Program Type (page 9). Then, press 4 / ¢ to start searching.
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH */ FRENCH/ GERMAN), then press to confirm.
NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.
AF SET ON *: Automatically searches for another station broadcasting the same program in the same Radio Data System
network with better reception when the current reception is poor. ; OFF: Cancels.
REGIONAL ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
■ Hold for about 2 seconds to memorize the current station or the selected Program
Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)
■ Press briefly to recall memorized station (or Program Type after entering the PTY
search mode).
Hold to turn on or off the Traffic Information function (not applicable if “MW/LW” is selected).
B64-4799-10_01_E_English.indd 8 B64-4799-10_01_E_English.indd 8 11/01/06 15:05 11/01/06 15:05