Kenwood KDC-4751SD User Manual

Page 23

Advertising
background image

English

23

Item

Selectable setting (Preset: *)

BT F/W UPDATE/
BT UPDATE

Display the firmware version and update the firmware.

MIC GAIN

–3 — 0 * — +3: Adjust the sensitivity of the built-in microphone for a telephone call. Adjust the voice of
caller. Setting to “+” increases the voice volume.

NR LEVEL

–3 — 0 * — +3: Reduce the noises generated by surrounding environment without changing the
built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise
reduction.

EC LEVEL

–2 — 0 * — +2: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.

MIC SELECT

KDC-BT41U only
Determines whether the built-in or external microphone is to be used when the receiver incorporates a
microphone. IN *: Use the built-in microphone. ; EXT: Use the external microphone.

About the Cell-Phone

Version: Bluetooth Standard Ver. 2.0

Profile:
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
SYNC (Synchronization Profile)

For the cell-phones verified for
compatibility, access the following URL:
www.kenwood.com/cs/ce/bt/

The units supporting the Bluetooth
function have been certified for
conformity with the Bluetooth Standard
following the procedure prescribed
by Bluetooth SIG. However, it may be
impossible for such units to communicate
with your cell-phone depending on its
type.

B64-4799-10_01_E_English.indd 23

B64-4799-10_01_E_English.indd 23

11/01/06 15:05

11/01/06 15:05

Advertising