Kenwood KDC-4751SD User Manual

Page 7

Advertising
background image

English

7

Initial settings before operations

1

Press SRC to enter [STANDBY] mode.

2

Press the volume knob to enter [FUNCTION] mode.

3

Turn the volume knob to select [INITIAL SET], then press to enter.

4

Turn the volume knob to make a selection, then press to confirm.
See table below for selection.

5

Hold

to finish the procedure.

Item

Selectable setting (Preset: *)

PRESET TYPE

NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;
MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).

KEY BEEP

ON */ OFF: Activates/deactivates the keypress tone.

RUSSIAN SET

ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF *: Cancels.

P-OFF WAIT

Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

BUILT-IN AUX/
BUILTIN AUX

ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected as
the source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source.
When you turn on the power, the sound attenuates (to prevent noise when no external component is connected).
Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

CD READ

1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound
can be heard if an audio file disc is played.

SWITCH PREOUT/
SWITCH PRE

REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the
rear of the unit (through an external amplifier).

SP SELECT

OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

F/W UP xx.xx

YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/

B64-4799-10_01_E_English.indd 7

B64-4799-10_01_E_English.indd 7

11/01/06 15:05

11/01/06 15:05

Advertising